Points That Must Be Observed
Observe the points below. Failure to observe these points may not only result in loss of performance, but may also cause faulty operation or breakdown.
This machine is a precision device.
- Handle carefully, and never subject the machine to impact or excessive force.
- Diligently keep clean of cutting waste.
- Use within the range of specifications.
- Never attempt to move the spindle unit or the table by hand with undue force.
- Never needlessly touch anywhere inside the machine except for locations specified in this manual.
Install in a suitable location.
- Install in a location that meets the specified conditions for temperature, relative humidity, and the like.
- Install in a quiet, stable location offering good operating conditions.
- Never install outdoors.
This machine becomes hot.
- Never cover the ventilation holes with cloth, tape, or anything else.
- Install in well-ventilated location.
About cutting tools
- Use a cutting tool that is suitable for the workpiece and the cutting method.
- The tip of the cutting tool is breakable. Handle with care, being careful not to drop it.
Never allow children to use this machine by themselves and keep it out of children's reach.
- Never keep the machine within children's reach to prevent them from inadvertently swallowing a small part, etc.
- Restrain children from playing with the plastic bags used for packing. Pulling the plastic bags over one's head or swallowing them may lead to suffocation.